EURO CYLINDER MEASURING GUIDE

EURO CYLINDER MEASURING GUIDE width=

Product Description

One of the great benefits of euro profile cylinders is that they are extremely easy to install and remove. All you need to do are the following steps;

Remove the fixing screw holding the lock in place.
Loosen any screws which may be holding your escutcheon or faceplate over the end of the lock or handle in place.
Insert the key into the cylinder and turn to either side as you pull the lock towards you to release it. Here you are trying to line the cam up so that the lock can slide out of the door.
Easy as that!

Measuring your cylinder doesn't have to be complicated, check out our quick guide below so you don't end up like that guy!

There are two ways to measure a Euro Cylinder lock - either inside the door, or when it has been removed.

The safest way to measure the cylinder is to remove it from the door following the instructions above. Once you have removed the cylinder from the door, it is very easy to measure it. To get the correct measurements, measure from the end cylinder barrel to the centre of the screw hole on either side. This will give you two different measurements in millimetres, for example 35/35, or 35/40. We list the internal measurement first, with the external side of the lock second. It is important to check which is the internal and which is the external measurement when purchasing a new cylinder lock.

You can also measure the lock whilst it is in the door by placing a ruler or measuring tape up against the door when it is open. Here you can measure from the outside edge of the cylinder to the middle of the fixing screw in the door and then the same again for the other side. We do not recommend this method of measurement though as it is less accurate than removing the lock to measure.

 


 

Price : £0.00